Cooler Master MWE 650W V2 Bronze Power Supply
-37%

Cooler Master MWE 650W V2 Bronze Power Supply

5,199.00

5,199.00

Add to cart
Buy Now
Categories:

Features :

 

POWER UP

 

The MWE Bronze offers a simple, reliable way to power your mid-range system safely and efficiently. The 80 PLUS Bronze efficiency rating, DC-to-DC circuit design, discrete cables, silent mode, and 120mm HDB fan offer a power supply unit that’s solid in features and performance while remaining simple. This PSU will handle all your core computing needs with none of the hassles or challenges of additional specialty features, software synchronization, or other bells and whistles. Just plug the cables you need into your components and get to work. For a great computing experience, you can’t go wrong with the MWE Bronze.

 

 

80 PLUS BRONZE EFFICIENCY

 

The efficiency of your power supply unit is important because it directly affects you system’s performance and your power bill. The efficiency rating does not reflect the quality or reliability of a PSU. It only reflects the unit’s ability to move power from the wall to your components. The higher a PSU’s efficiency is, the lower the total amount of power it needs to power your system. The MWE Bronze series has an 80 PLUS Bronze efficiency rating, meaning it has a guaranteed typical efficiency of 85%.

Cooler Master now reports Cybenetics noise and efficiency ratings for current power supply units where applicable.

 

 

DC-TO-DC CIRCUIT DESIGN

 

Power comes in multiple voltage levels. The wall delivers power in one voltage level but your components each need a specific voltage to operate properly. The process of converting raw power from the wall to the multiple voltage levels your parts need requires special components to complete this process quickly, efficiently, and safely. The MWE Bronze’s DC-to-DC LLC technology was painstakingly crafted to accomplish this goal. The Dual Forward circuit layout has been designed to convert 12V power to 3V and 5V levels with minimal ripple noise, 80 PLUS Bronze efficiency, and reduced risk to your connected hardware.

 

 

ACTIVE POWER FACTOR CORRECTION

 

The many processes required by a power supply unit in order to take power directly from the wall or other fixed power source, convert it to the correct output required by the connected components, and then distribute that power to said components safely can be full of risks. This is why it’s important for a PSU to have the right protections and regulations to ensure this process runs correctly.

The MWE Bronze’s Active Power Factor Correction uses a specialized circuit to correct power factor, leading to reduced total harmonics, corrected AC input voltage, and increased overall efficiency output.

 

 

 

SPECIFICATIONS :

 

MODEL MPE-6501-ACAAB-IN
SERIES MWE Series
80 PLUS Bronze
MODULAR Non Modular
ATX VERSION ATX 12V Ver. 2.52
PFC Active PFC
INPUT VOLTAGE 100-240V
INPUT CURRENT 10-5A
INPUT FREQUENCY 50-60Hz
DIMENSIONS 140(L) x 150(B) x 86(H) mm
FAN SIZE 120mm
FAN BEARING HDB
FAN SPEED 2400 RPM
NOISE LEVEL @ 20% 11.06 dBA
NOISE LEVEL @ 50% 22.3 dBA
NOISE LEVEL @ 100% 41.3 dBA
EFFICIENCY 85% Typically
80 PLUS RATING 80 PLUS Bronze
ERP 2014 LOT 3 Yes
OPERATING TEMPERATURE 40°C
POWER GOOD SIGNAL 100-500ms
HOLD UP TIME >18ms at 100% full load@230Vac
MTBF >100,000 Hours
PROTECTIONS OVP, OPP, SCP, UVP, OTP
REGULATORY CCC, CE, TUV-RH, RCM, EAC, cTUVus, FCC, BSMI, KC, CB
ATX 24-PIN CONNECTORS 1
EPS 4 4 PIN CONNECTORS 1
EPS 8 PIN CONNECTOR 1
SATA CONNECTORS 8
PERIPHERAL 4-PIN CONNECTORS 4
PCI-E 6 2 PIN CONNECTORS 4
WATTAGE 500 to 750W
Warranty 5 Years

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Top